Best Bitcoin Mining Software: Best Miners in 2020 [UPDATED

such beginner shibe thread wow how to get coin

 how to shibecoin v rich in minutes much instruct so simple any doge can do 


UPDATE 1/21/14: I'm not updating this guide anymore. Most of the steps should still work though. See the wiki or check the sidebar for updated instructions.
Before you do anything else, you need to get a wallet. Until there's a secure online wallet, this means you need to download the dogecoin client.
Now open the client you just downloaded. You'll be given a default address automatically, and it should connect to peers and start downloading the dogechain (aka blockchain in formal speak). You'll know because there will be a progress bar at the bottom and at the lower right there should be a signal strength icon (TODO: add screenshots).
If you've waited 2 or 3 minutes and nothing is happening, copy this:
maxconnections=100 addnode= addnode= addnode= addnode= addnode= addnode=miner.coinedup.comdoge addnode= addnode= addnode= 
And paste it into a new text file called dogecoin.conf, which you then place into the dogecoin app directory.
Now restart your qt client and the blockchain should start downloading in about 1-2 minutes.
Once it finished downloading, you're ready to send and receive Dogecoins!


Decide how you want to get Dogecoin. Your options are:
I'll go into detail about each of these. I'm currently writing this out. I'll make edits as I add sections. Suggestions are welcome.


Mining is how new dogecoins are created. If you're new to crypto currencies, read this. To mine (also called "digging"), a computer with a decent GPU (graphics card) is recommended. You can also mine with your CPU, but it's not as efficient.


These instructions cover only Windows for now. To mine, you'll need to figure out what GPU you have. It'll be either AMD/ATI or Nvidia. The setup for both is approximately the same.

Step One: Choose a pool

There's a list of pools on the wiki. For now it doesn't really matter which one you choose. You can easily switch later.
NOTE: You can mine in two ways. Solo mining is where you mine by yourself. When you find a block you get all the reward. Pool mining is when you team up with other miners to work on the same block together. This makes it more likely that you'll find a block, but you won't get all of it, you'll have to split it up with others according to your share of the work. Pool mining is recommended because it gives you frequent payouts, because you find more blocks. The larger the pool you join, the more frequent the payouts, but the smaller the reward you get.
Over a long period of time the difference between pool and solo mining goes away, but if you solo mine it might be months before you get any coins.

Step two: Set up pool account

The pool you chose should have a getting started page. Read it and follow the instructions. Instructions vary but the general idea is:
When you're done with this, you'll need to know:

Step three: Download mining software

For best performance you'll need the right mining software.
Unzip the download anywhere you want.

Step four: Set up miner

Create a text file in the same folder as your miner application. Inside, put the command you'll be running (remove brackets).
For AMD it's cgminer.exe --scrypt -o stratum+tcp://: -u -p
For Nvidia it's cudaminer.exe -o stratum+tcp://: -O :
Substitute the right stuff in for the placeholders. Then on the next line of the text file type pause. This will let you see any errors that you get. Then save the file with any name you want, as long as the file extension is .bat. For example mine_serverName.bat.

Step five: Launch your miner

Just open the .bat file and a command line window should pop up, letting you know that the miner is starting. Once it starts, it should print out your hash rate.
If you now go to the pool website, the dashboard should start showing your hashrate. At first it'll be lower than what it says in the miner, but that's because the dashboard is taking a 5 minute average. It'll catch up soon enough.
NOTE: A normal hashrate is between 50 Kh/s up to even 1 Mh/s depending on your GPU.

You're now mining Dogecoins

That's it, nothing more to it.


CPU mining isn't really recommended, because you'll be spending a lot on more on power than you'd make from mining Dogecoin. You could better spend that money on buying Dogecoin by trading. But if you have free electricity and want to try it out, check out this informative forum post.


Trading has been difficult so far, but Dogecoin just got added to a few new exchanges. If you don't have a giant mining rig, this is probably the best way to get 100k or more dogecoins at the moment. I'll write up a more complete guide, but for now check out these sites:


Faucets are sites that give out free coins. Usually a site will give out somewhere between 1 and 100 Dogecoin. Every site has its own time limits, but usually you can only receive coins once every few hours, or in some cases, days. It's a great way to get started. All you do is copy your address from the receive section of your wallet and enter it on some faucet sites. Check out /dogecoinfaucets for more. If you go to each site on there you might end up with a couple hundred Dogecoin!


This method is pretty straightforward. Post your receiving address, and ask for some coins. Such poor shibe. The only catch is, don't do it here! Please go to /dogecoinbeg.


At the moment there are two tip bots:
Other redditors can give you Dogecoin by summoning the tip bot, something like this:
+dogetipbot 5 doge
This might happen if you make a good post, or someone just wants to give out some coins. Once you receive a tip you have to accept it in a few days or else it'll get returned. Do this by following the instructions on the message you receive in your inbox. You reply to the bot with "+accept". Commands go in the message body. Once you do that, the bot will create a tipping address for you, and you can use the links in the message you receive to see your info, withdraw coins to your dogecoin-qt wallet, see your history, and a bunch of other stuff.
As a bonus, so_doge_tip has a feature where you can get some Dogecoins to start with in exchange for how much karma you have. To do this, send the message "+redeem DOGE" to so_doge_tip. You'll need to create a tipping account if you don't have one.
If you want to create a tipping account without ever being tipped first, message either of the bots with "+register" and an address will be created for you.


  • 1/21/14 - Added note about this thread no longer being updated
  • 1/21/14 - Changed wallet links to official site
  • 12/27/13 - Added 1.3 wallet-qt links
  • 12/21/13 - Added new windows 1.2 wallet link
  • 12/20/13 - Fixed +redeem text
  • 12/18/13 - Added short blurb on trading.
  • 12/18/13 - Updated cudaminer to new version (
  • 12/18/13 - Fixed +redeem link
  • 12/18/13 - Updates dogecoin.conf, from here.
  • 12/17/13 - Linked to mining explanation.
  • 12/17/13 - Added link to CPU mining tutorial, in response to this.
  • 12/16/13 - Added links to tip commands, link to dogetipbot wiki.
  • 12/16/13 - Note about tip commands going in body, in response to this.
  • 12/16/13 - Added link to cgminer mirror, thanks to scubasteve812 and thanks to Bagrisham.
  • 12/16/13 - Note about removing brackets in response to this.
  • 12/15/13 - Fixed hash rate as per this comment, thanks lleti
  • 12/15/13 - Added info for all other ways of getting money, except for trading (placeholder for now)
  • 12/15/13 - Added windows GPU mining instructions 12/15/13 - Added wallet instructions, list of how to get money
submitted by lego-banana to dogecoin [link] [comments]

The best mining software in 2018

The best mining software in 2018

Discover the best programs to start mining Bitcoin and other cryptocurrencies today

If you've decided to take the plunge and have bought your own Bitcoin (BTC) mining hardware or mining rig, your next step is to connect to a mining 'pool'. This allows you to share your machine's resources over the internet and receive a portion of the mining profits in return.
There are a number of programs available to help manage your crypto-mining. In this guide, we've explored five of the most popular. If you're an experienced computer user, you may prefer to install the free operating system Linux and make use of one of the text-only programs such as CGminer.
If you prefer to keep things simple and are sticking with Windows 10, mining clients with a GUI such as MultiMiner may suit you better.
Before getting started, if you want to be sure a mining program will work with your particular device or operating system, the Bitcoin Wiki has a very helpful list.
submitted by ProductsNews to u/ProductsNews [link] [comments]

Guide For New Shibes

So it has become apparent to me from the constant questions on this subreddit that a lot of new miners/shibes need help, so I have decided to make a basic guide to most of the questions I see a lot here.
1) BTC - This means Bitcoin so If you see a miner that says BTC it does not work with dogecoin because dogecoin is Scrypt.
2) Scrypt - This is what dogecoin runs off of, or what your computeasic/gpu solves to support the network.
3) Asic - This stands for an application-specific integrated circuit, or in less confusing terms a miner dedicated completely to mining a particular type of coin such as dogecoin.
4) GPU Mining - Using a graphics card to mine crypto currencies.
5) CPU Mining - A slow and inefficient way of using your computers Central Processing Unit to mine crypto currencies.
6) Hash Rate - The rate at which you mine a crypto currency. The higher the better.
7) KH - This Means Kilo Hashes. 1KH = 1,000 Hashes a Second
8) MH - This Means Mega Hash - 1 MH = 1,000,000 hashes a second.
9) Should I buy an asic? - If you want to support the network yes. If you want to solely make money off of it No. Buy the coin if you want to make profit. This is my opinion, there is no one answer to this question.
10) Mining Pool - Pooled mining is a mining approach where multiple generating clients contribute to the generation of a block, and then split the block reward according the contributed processing power. Pooled mining effectively reduces the granularity of the block generation reward, spreading it out smoothly over time.
Tl/DR You Work with other miners to solve stuff faster making you money faster.
11) Mining Difficulty - How hard it is to solve the problems to generate dogecoin.
12) Do I need a fan? - Yes I cannot stress how important it is to properly cool your units. Make sure your units are always cool or else they might melt. Do not think you are safe just because you turn your ac up, but a fan.
13) What Mining Pool Should I Pick? - Here is a list of all of the pools Pick one that works for you.
14) What is a wallet? - This is where you store your dogecoin and where you can send and receive dogecoin.
15) What Wallet Should I get? - Online is convenient but not safe. Paper Is the Safest But Not convenient. Cold Storage is the mostly safe and somewhat convenient.
16) What is cold storage? - Basically putting your wallet on an offline device like a usb.
17) Can I mine on a mac? - Yes look here for more info.
18) Cloud Mining - A service you buy that mines for you. you pay for a certain amount of hashes, lets just say 10gh for an example, and the company/service mines you this amount for the time you bought. It is not profitable usually.
19) What Is a Raspberry Pi? - A small cheap computer that people use to run their miners on.
20) Watts - The measure of electricity.
21) Should I pre-order? No Never F%&$ing pre order, you will get scammed 99.9999% of the time.
22) Can I still mine? - Yes, you probably wont make money but you will support the doge community.
23) Linux - An operating system like windows that people use to run mining programs on.
24) If you Have an animal make sure to properly protect your mining rig from them. Wires from the machines make great chew toys.
25) How Do I calculate if im going to make money with my mining rig? - Use This mining Calculator This is also a very good calculator
26 What Mining Program Should I use? Windows: CG MINER Mac: Astroid Linux: CG Miner again
Goodluck mining I hope this helps. This Also Took A long time to make so support would be appreciated :)
submitted by sircam22 to dogemining [link] [comments]

Raspberry Pi + ASIC defcoin mining guide

Want to get started mining defcoin with an ASIC and a Raspberry Pi? Does 360 KH/s of mining power sound appealing? Here’s how to do it.
1) Hardware List
-Raspberry Pi Model B
--SD Card
--Micro USB power supply
--Ethernet cable
-Gridseed ASIC
--12V power supply (5.5mm/2.5mm barrel connector)
--USB to Mini USB data cable
The main component is the Gridseed ASIC, which will be doing the Scrypt calculations. The Raspberry Pi will be used as the controller for the ASIC, and will be doing the communication with the mining pool. If you’re not familiar with the term, an ASIC is an Application-Specific Integrated Circuit - basically a chip with a single purpose, like mining crypto currency. Using an ASIC will allow us to mine more efficiently than we would be able to with general purpose hardware.
The ASIC that I’m using is a “300+ KH/s Single Gridseed ASIC Miner”. It looks like a CPU heatsink with a fan attached. There is actually a circuit board with 5 ASIC chips sandwiched between two halves of this heatsink, and has a mini USB connector and a power connector sticking out the side. There are a few places where you can buy these. I bought mine at for $130. That was the lowest price that I could find, and I had a good experience buying from them. Use this link, and you can get $20 off of a $200 order (and give me some referral points :-)) GAWMiners. You can also find other vendors by searching for “Gridseed ASIC”. You’ll need a 12V power supply to power the ASIC, and a USB A to USB Mini B cable to connect the ASIC to the Raspberry Pi. I’m using a 60W power supply, which seems to be working fine for defcoin (Scrypt) mining. These ASICs can also mine Bitcoin at the same time, but you may need a beefier power supply if you want to do that.
The Raspberry Pi can be purchased at any number of places- Amazon, SparkFun, AdaFruit, etc. I’m using the Model B because I had one already, and also because it has a built in ethernet port that will make connecting to the internet easy. Make sure to get an SD Card and a micro USB power adapter to get the Pi up and running too.
2) Software
If you haven’t already, download the defcoin wallet from If you want to do pooled mining, create an account for one of the defcoin pools, such as or whichever other pool you want to mine. Once you’ve created a pool account, make sure to create a worker too (for MPOS pools, that will be under My Account > My Workers). The password for your worker does not have to be the same as the password for your pool account (and it probably shouldn’t be).
Next, download the latest Raspbian image from and install the image to your SD card. Instructions for installing the image can be found here. If you are using the dd method on a Mac, make sure to use /dev/rdiskX instead of /dev/diskX - both will work, but rdiskX is much faster. Once you have the image installed, put the SD card in the Raspberry Pi, connect the Pi to your network, and connect the Pi to your micro USB power adapter to power it on. Next, SSH in to your Raspberry Pi with the default username and password pi/raspberry. I use nMap to find the IP address that has been assigned to my Pi. You can also use an HDMI display and a USB keyboard to log in instead of using SSH. After logging in for the first time, run through the wizard that comes up to configure your Raspberry Pi. The defaults are fine for most things, just make sure that you don’t skip the step to expand the filesystem to use the rest of your SD card. If you don’t expand the filesystem, there won’t be enough space for other software.
Once you have Raspbian installed, and have gotten through all of the first login setup stuff (which will likely end with a reboot), log back in to the Raspberry Pi with the pi user. From the command line, run sudo apt-get update sudo apt-get dist-upgrade
There are some stability issues with USB communication between the Raspberry Pi and the Gridseed ASIC. Enabling SLUB debugging seems to resolve this, at least well enough to prevent the Raspberry Pi from freezing every so often. Open the /boot/cmdline.txt file, and add the following text to the end of the line. Don’t add a new line, just add this to the end. You can use vi, nano, or whatever your favorite text editor is to do this.
Reboot the Raspberry Pi once you’ve added that flag to your /boot/cmdline.txt file.
sudo shutdown -r now 
Log back in with the pi user once the Raspberry Pi is finished rebooting.
The mining software that we’re going to use is a customized version of cgminer that has support for the Gridseed GC3355 chips that are used in our ASIC. There are a number of different mining programs out there, this is just what has been working the best for me so far. First, install git and dependencies needed to compile cgminer.
sudo apt-get install git build-essential libtool libcurl4-openssl-dev libncurses5-dev libudev-dev autoconf automake 
Next, clone the git repository for cgminer-gc3355
git clone 
Next, we’ll build cgminer.
cd cgminer-gc3355 autoreconf -i ./configure --enable-scrypt --enable-gridseed make 
Once the make command finishes, we’re ready to run the mining software. You can also run make install if you want to install the software, but running it out of the build directory works just fine. Plug in the power supply for your ASIC, and connect the ASIC to it. Connect the USB cable to the ASIC and to your Raspberry Pi. Run the mining software by running the following command. The -o option specifies your pool URL, the -u option specifies your username and the workername that you set up for the pool, and the -p option is the password for your worker. There are a couple of options available that are specific to the gridseed ASICs, and those will be placed after --gridseed-options. The freq=850 option sets the clock frequency of the ASIC to 850 MHz. There are other clock options available, but 850 seems to be working best for me. I was getting hardware errors at 900, and a lower average hash rate. I am getting about 360 KH/s with the clock frequency set to 850.
sudo ./cgminer -o stratum+tcp:// -u Username.Workername -p yourworkerpassword --gridseed-options freq=850 
This command needs to be run with sudo in order to access the USB hardware. You can also create another user specifically for mining, or grant the pi user the appropriate permissions if you don’t want to run cgminer as root. When you run this command, you should see output from cgminer showing that it is communicating with the mining pool, and something showing your hash rate. If you’ve gotten this far, and you’re seeing output from cgminer showing a hash rate, congratulations, you’re mining defcoins with your ASIC! There are just a couple more steps to do if you want to let your Raspberry Pi and ASIC continue mining without needing you to be logged in.
To keep cgminer running after I log out, I am using nohup. You could also use screen instead of nohup. Create a script ( by running the following commands.
echo “nohup /home/pi/cgminer-gc3355/cgminer --real-quiet -o stratum+tcp:// -u Username.Workername -p yourworkerpassword --gridseed-options freq=850 &” > /home/pi/ chmod a+x /home/pi/ 
If you run this command with sudo, cgminer will run in the background, and will continue running after you log out. If you want to have this run when your Raspberry Pi boots, modify your /etc/rc.local script so that it executes this script. Your /etc/rc.local file will end up looking like this:
# Print the IP address _IP=$(hostname -I) || true if [ "$_IP" ]; then printf "My IP address is %s\n" "$_IP" fi /home/pi/ exit 0 
That’s it! You should now have a Raspberry Pi controlling a defcoin mining ASIC, that starts mining as soon as it boots up. For more reading, check out some of the links below.
Gridseed GC3355 5 Chip Setup writeup on bitcointalk
Crypto Mining Blog
There are also some pre-built images for using a Raspberry Pi as an ASIC mining controller. I haven’t tried any of these myself, but they could be worth checking out. Raspberry Pi Controller Images with Gridseed ASIC Support
submitted by _RedBaron_ to defcoin [link] [comments]

Bitcoin mining on OS X (10.7.5)

Posted this in /bitcoin first but was told that I might have better odds getting a good answer here instead.
I have a MBP from 2011 with the following stats:
I've been looking around for a miner to run on this computer while it idles, and I have noticed that there is no many alternatives out there for a Mac. In addition, I seem to be running into problems using the ones that do exist, most likely because most of them are GPU miners and the integrated graphics card on this machine is fairly shit.
I am aware that mining on this machine will never really give me much, but I enjoy the idea of having the computer at least try to do something useful. :)
Both DiabloMiner and Bitminter do not work for me.
The miner that at least seems to run is cgminer, however when checking the output it will show me an average hashrate of 0.0 Kh/s, and a certain number of "Work items generated locally".
Anyone have any suggestions to what I could do to be able to mine on this machine?
submitted by yponac to BitcoinMining [link] [comments]

To help you get started on bitcoins...

Sup fellow reddit members!
Today I'm here to give you guys a long introduction about bitcoins.
Intro to bitcoins:
Bitcoins are the first decentralized digital currency.
Bitcoins are basically digital coins that you can send through the internet.
Some advantages of bitcoins:
  1. It can be transfered through other people without a bank having involved in the transaction.
  2. The transaction fees are much lower.
  3. You can use them in any and every country.
  4. Your account (explained later) can never be frozen.
  5. No limits!
How it works:
There are several online bitcoin currency exchange where you can exchange bitcoins for money and vice versa.
Bitcoins are kept in a digital wallet on your computemobile device. is one of the most trustworthy online bitcoin wallet, IMO.
Sending bitcoins is as simple as sending an email, and you can purchase ANYTHING with bitcoins as long as they accept the currency.
The bitcoin software is completely open-sourced, so anyone can review the code.
Bitcoins are easy + free to setup, and there are no chargebacks!
How to obtain bitcoins:
There are two ways to obtain bitcoins:
  1. Buying them from exchanges/privately. The one that I trust the most is
  2. Mining them using applications. Miners solve math problems/bitcoin algorithms (which takes computing power) and are rewarded bitcoins for doing that. This is the one that I'm going to focus on, as it is pretty hard to grasp.
Mining bitcoins:
Using special software application, you are able to mine bitcoins. Mining means to solve math problems/bitcoin algorithms using your computing power.
Blocks are a chunk of 25 bitcoins, and if you solve one math problem you automatically get a block.
The speed of mining bitcoins is measured in Hashes/Second (KH/s, MH/s, GH/s, TH/s etc.)
The difficulty of the problems gradually increases as more bitcoins are found. Now, it is almost impossible to find bitcoin blocks by yourself, as more than 10 million bitcoins have been mined.
Using special hardware (ASIC, Application-Specific Integrated Circuit chips) that specifically is aimed to mine bitcoins increases your mining speed by a lot. You can buy these hardware anywhere online/offline. has many ASIC hardware on sale.
But even ASIC mining can still take a long time to find a block by yourself. That's how the pooled mining began.
Pooled mining basically combines the work of many miners toward a common goal. Pool of miners find the solution of the math problems faster than individuals, and they share the block equally based on each miner's hash rate.
There are many pools right now that are pretty trustworthy, but that one that I use is triple mining:
Mining bitcoins on a Mac:
This part is only dedicated on mining bitcoins for Mac users. If you're a PC user or a Linux/Ubuntu user, skip this.
  1. Go to and download the latest version of Asteroid
  2. Open Asteroid
  3. Under Mining Pool, select TripleMining
  4. Hide the application, go to whatever browser you use, and go to
  5. Register for an account
  6. Under the workers tab, add a new worker (on the right side)
  7. Go back to Asteroid, and fill in your worker username + password.
  8. Start mining
  9. You're done
Mining bitcoins on a PC:
This part is only dedicated on mining bitcoins for PC users. If you're a Mac user, view above. If you're a Linux/Ubuntu user, skip this.
  1. Go to and download the latest version of GUI miner
  2. Open GUI miner
  3. Select Triplemining for the server
  4. Hide the application, go to whatever browser you use, and go to
  5. Register for an account
  6. Under the workers tab, add a new worker (on the right side)
  7. Go back to GUI miner, enter in your worker username/password
  8. If you have any hardware, then select them in the device tab. If not, skip this step
  9. Start mining
  10. You're done
Mining bitcoins on a Ubuntu/Linux:
This part is only dedicated on mining bitcoins for Linux/Ubuntu users. If you're a Mac or PC user, view above.
Unfortunately, I have no experience in how to install any miner on Linux. The following website does however, so just follow it
The end
I think I covered most of the points on bitcoins. However, if there is any mistakes/stuff that I should add, please put a comment below or PM me! It will be greatly valued!
I spent sometime doing this, so some donation will be very appreciated. My bitcoin address is on my signature.
Credits to,,,
Helpful? Considering mining in my pool: (PM me if you STILL don't know how to mine bitcoins) Tip me at:
submitted by evilbeans124 to Bitcoin [link] [comments]

The Absolute Crypto-Coine Beginenrs Guide to MyriadCoin-Mining

Hello, I'm a new member of the Myriadcoin-Community and I made a mining guide for crypto-currency newbies over on my blog. I thought it would fit here as well, hoping that some newbie would discover it upon his quest for mining crypto-coins. (I hope it is ok, that I just copied it over)

The Absolute Crypto-Coin Beginners Guide to MyriadCoin-Mining


I researched the technology behind Bitcoin, especially the blockchain, for the past week because it could have been helpful with my current research on electronic voting that I am doing for my project thesis. During that I was amazed by the simple and yet powerful ideas behind crypto-currency. I was tempted to invest some of my spare money (which is not much as an undergraduate) into crypto-currencies, but was appalled by the weak points of Bitcoin, that become apparent if one researches it. (Malleability, 51% Attacks, Selfish Mining, etc. If there is interest I can maybe try to scramble together an article going in detail about attacks on crypto-currencies)
Then I discovered Myriadcoin, which solved most of the problems I had with Bitcoin. Although I myself am quite new to the Myriadcoin-Community I present to you, the absolute crypto-coin beginners guide to Myriadcoin-Mining. The following guide is written for Windows, the process may be similar on Linux/Mac OS but is not 100% the same

Setting up your Wallet

Your Myriadcoin-wallet is very much like your everyday wallet. It holds your currency, and if you lose it your money is gone.
  1. Go to the Myriadcoin homepage
  2. Download The wallet for your OS. (Currently there are Windows and Mac OS Wallets)
  3. Unzip the downloaded
  4. Start the myriadcoin-qt.exe
After the installation is done you should see your wallet stating that your current funds are 0 MYR. At the beginning the wallet has to download all the information from the blockchain, which can take a while. You can see the progress at the bottom of the wallet. Upon pressing the receive-button at the top you will see your automatically generated address. This address can be used to receive Payment. You can generate as many adresses as you want. Under Settings you can Encrypt your wallet, which you probably should do if you plan to use it seriously. Keep in mind, that if you lose your password you have no means to get to your money. Under File you can create a backup and save it somewhere.

Getting to Mine

Mining is the process which verifies currency transactions between accounts. It is simultaneously the process which generates new coins up to a limit. (20 billion is the limit for MYR). To mine a block means to solve a cryptographic puzzle in form of a hash. Myriadcoin uses 5 of those hash-algorithms. If you are a complete newbie to mining and crypto-currencies chances are you do not have specialized Hardware. Because of that it probably is best if you mine using the skein, groestl or qubit algorithms. Do not be scared of the names, I will guide you trough. If you made your mind up which of those you want to use (just pick one, if you do not want to research them) you can go to this post. The following step by step guide is using the skein algorithm with the Modified cgminer and the cryptorus mining pool. The steps can differ slightly if you use a different algorithm or pool, but should be similar.
  1. Go to the above linked post and scroll down to the Standalone Miner Section
  2. Pick a miner. (I use the modified cgminer
  3. Got to the post again and scroll to the Pools Section
  4. Pick one of the mining Pools fitting your chosen algorithm. (I pick for this one)
  5. Go to the homepage and register if necessary (Lets say my name is Testhans)
  6. Once you registered you should look for the My Workers Option
  7. There create a new worker. (Lets say I make a worker with the name Myry and the password 1234)
  8. Now unzip the Miner you downloaded
  9. Go to the folder of the miner and create a new textfile that you name run.bat
  10. Go to your pool-website and look for the stratum address. (Can be usually found on the startpage, in this my case stratum+tcp://
The run.bat should look as follows:
name_of_miner.exe -o stratum-address -u YouName.Workername -p Workerpassword (For some algorithms you have to set the algorithm as an option too)
This is how my config looks with the examples above:
cgminer.exe --skein -o stratum+tcp:// -u Testhans.Myry -p 1234
Save the run.bat and you should be able to start the miner through double clicking. A console-window should open displaying the progress. Every time you find a share a message saying something along the lines of "Accepted 214sabc5fe 4/2" should be displayed.
You can enter your Myriadcoin-address inside the Account-Options of your pool, so you can receive your share of the coins you mined. Typically you have to arrange the transaction yourself. Usually the miner can take a lot of options to optimize the amount it can mine, but as a newbie you are likely to break more than you get out of it. The standard-configuration of miner-tools is in most cases pretty good allready.

Further Resources

You can find further resources on the bitcointalk-forums and the awesome subreddit. Also there is another mining-guide, which goes into more detail on all of the algorithms and can be quite helpfull if you are just new to Myriadcoin and not to the crypto-currencies as such.
If you have any suggestions or questions feel free to leave a comment, and if you found my guide useful and want to share some of your hard-mined coins, you can do that also. My Myriadcoin address is MKF8EPYksAV4Bn7M8HLEMyvEPtq3EWeGVW
submitted by WeGi to myriadcoin [link] [comments]

Setting up solo mining just targeting USB erupters? PC/Mac?

I am having trouble trying to get solo mining started on either my PC or Mac. I have a PC set up that is using three 7950s that are mining Litecoins. I'd like to have my 2 USB erupters solo mining Bitcoins for fun on the same system. I have the drivers installed for the USB miners and my system recognizes them.
I am starting Bitcoin-QT as -server
My bitcoin.conf looks like this: listen=1 server=1 rpcuser=user rpcpassword=pass
I set up a BFG .bat like this: bfgminer.exe -o -O -u user -p pass
When I launch that, BFG just crashes. I have also tried it with CGminer and that crashes also. I'd like to keep CGminer on the cards Litecoin mining and use BFG for the USB miners.
How do I get BFG to work just with the USBs? Also, do I need to input a Bitcoin address somewhere so if I did solve something I get the payout?
Sometimes, I do more work on my Mac and am also trying to set up the USBs to mine on a Mac using Diablo miner. Will that work the same way as the PC setup once we get it figured out?
Thanks for any help.
submitted by PoisonCoyote to BitcoinMining [link] [comments]

Mjollnircoin is released! A new open-source peer-to-peer crypto currency. Ultra-secure, Fast Transactions & ASIC resistant Crypto currency

Today we have released Mjollnircoin , a decentralized digital currency that enables instant payments to anyone in the world; it is a lite version of Bitcoin using a redundant cryptographic function as a proof-of-work algorithm. Mjollnircoin is a people's currency, intended to be efficiently mined with consumer-grade hardware. It is ultra secure, ASIC resistant, Multipool resistant and rare with a total number of 42 million mjollnircoins.
Mjollnircoin uses peer-to-peer technology to operate with no central authority or banks; managing transactions and the issuing of mjollnircoins is carried out collectively by the network. There is no concept of ownership (nobody controls or owns the Mjollnircoin network) and there are no restrictions on who can take part.
For Windows, Mac OX and Ubuntu there are wallets available at The source code of Mjollnircoin and related projects is at
First Announced in
submitted by Mjollnircoin to Mjollnircoin [link] [comments] FAQ

General Questions What is a Bitcoin? Good question; see for more information.
What are your options to withdraw? We currently only allow withdrawals in BTC/LTC/BC/NMC/DOGE/XRP/DRK/RDD/BTS/CURE/PPC/NXT/SYS.
Why can't I deposit or withdraw "real currency", aka fiat (USD/EUJPY/GBP/CNY/RUB/etc.)? Due to international law, we do not allow you to deposit or withdraw fiat currencies. In the USA, there are MSB and FinCen regulations; in Europe, certain countries have banned cryptocurrencies, and in China, the banks aren't allowed to transfer cryptocurrencies. The laws may change in the future.
Why does my "Total Cryptocurrency Value" go down? This is because that display is tied to the exchange rates on other websites. Also see this user generated YouTube video for more information:
Are their any fees to join or monthly fees? No fees.
Do you speak Spanish/Russian/Chinese? No, only English, but Google Translator works well.
What are the maximums/minimums for withdrawing? There are no maximums. The minimums are small, see the withdraw page for details.
Where can I see the terms and conditions? Please click here for terms and conditions.
Where can I see the privacy policy? Please click here for privacy policy.
Are you hiring? We are always looking for quality talent. If you would like to contribute, then please send your cover letter and resume to [email protected].
Do you have a bug bounty program? Yes, we pay for bugs, so contact us for details or visit us at and submit bugs there!
Do you perform off-chain transactions? No we do not. All cryptocurrencies are sent, usually including miner fees, and can be seen on the blockchain for that respective cryptocurrency. This helps secure the network, makes our transactions transparent, provides an easier way to debug and track down coins, and reduces the chance for fraud. An off-chain transaction would be like what Coinbase could do if both users are Coinbase users and they change coins from one email to another, mark it in the database, and Bitcoin is never actually sent from one wallet to another.
Why does my balance reset after refreshing the page or changing cryptocurrencies? The server updates every 60 seconds and the balances you see updating in real-time are performed with Javascript. If you change pages quickly, or choose a new cryptocurrency, then it will look like it is resetting. However nothign is lost, as whatever cryptocurrency it is set at when the server updates will get the past 60 seconds of mining results.
Help! My account was hacked and withdraws are being made? Eobot is a secure site and has never been compromised. If your account was hacked, then you should change your password, turn on 2FA, and turn on email notifications. There are many unscrupulous Bitcoin sites, and most likely, you used the same password on another site. Never re-use passwords!
Do you have any wallpapers? Yes, you can download wallpaper1 or wallpaper2. Feel free to send us your own creations.
What does Eobot stand for? We have heard everything, let us know your favorite, including: Earn Online Bot, Earn Online Bitcoins Online Tool, Earn Online By Our Tech.
Is this legal? We cannot provide legal advice; make sure cryptocurrencies are legal in your jurisdiction before continuing to use Eobot.
Cloud Mining Questions What are the Cloud Mining fees? For electricity and maintenance, we currently charge a fee of 65% for SHA-256 and 65% for Scrypt. These values will change as difficulty increases, exchange rates change, and newer ASICs come online. These fees are better than our competitors, for instance CEX.IO charges $0.105 per GHS, which is a 81% fee! While GAW charges a 96% fee at current prices!
How long are the Cloud Mining rentals and contracts? Prior to October 11 2014, GHS/KHS contracts had no expiration. Old contracts are not affected. New contracts and rentals, mined or purchased after October 11 2014, are now limited in term for 5 years going forward. See your History tab for expiration dates.
Can I sell my Cloud Mining? No, you cannot sell the cloud shares at this time. This is because we own the hardware and do not want to be stuck if everyone decides to sell at once.
Can I buy Cloud Mining with credit card/USD? Yes, but please keep in mind you cannot sell or convert the Cloud Mining.
Can I buy Cloud Mining with cryptocurrency? Yes, deposit the cryptocurrency and then convert it to your choice of Cloud Mining.
What are the maximums/minimums when making a credit card purchase to buy Cloud Mining? The minimum is 1.0 GHS and 10.0 KHS and there is no maximum at this time.
Can I buy a Cloud Mining that mines in Scrypt? You can use the Cloud Mining SHA-256 hashing power to mine other currencies by automatically converting them as you mine, but the earnings will still be tied to SHA-256/Bitcoin difficulty, not Scrypt/Litecoin difficulty.
What is the difference between Cloud Mining SHA-256 and Cloud Mining Scrypt? One is tied to the difficulty in mining SHA-256 cryptocurrency (Bitcoin) and the other is tied to the difficulty in mining Scrypt cryptocurrency (Litecoin). This means that if history is any indication of the future, then the Cloud Mining Scrypt won't decrease as fast as the Cloud Mining SHA-256.
What does 1 instance of Cloud Mining SHA-256 and Cloud Mining Scrypt equal? 1 of Cloud SHA-256 equates to 1.0 GHS of SHA-256 mining power, while 1 of Cloud Scrypt equates to 1 KHS of Scrypt mining power.
Can I change the pool that my Cloud mines on? No, you cannot; this may change in the future.
What hardware is behind the Cloud Mining? The hardware varies from custom ASICs to GPUs. The ASICs are behind the SHA-256 and the GPUs are behind the Scrypt.
Can I RDP (remote desktop) into my Cloud Mining? No, you cannot at this time; we will run the servers for you.
What is the Cloud Mining Pre-Order? These are the same as the other Cloud Mining, but they will start mining on a later date. For instance, a Cloud Mining Pre-Order October 2014 will start mining on October 1, 2014.
Software/Miner Questions Why is it stuck on "initializing...please wait 5 minutes"? We recently changed our Scrypt pool, so this messge will show and the stats and speed won't show under your account. See pool info page for more info.
Why does it show as a trojan/virus? This is a false-positive that many of the popular antivirus programs report. For now you can ignore it, or try another free antivirus, like Microsoft Security Essentials. Hackers use something similar programs to make money off of people's computers, so that is why it shows up as a virus.
Why does Chrome block the download as malicious? This is another false-positive. Simply, go to your Chrome settings, scroll to the bottom and click on "Show Advanced Settings". Go to the Privacy section and uncheck "Enable phishing and malware protection". You will only do this temporarily. Then proceed to download our software. Then return to your privacy settings and recheck Enable Phishing to further protect you.
Do you have a Mac or Linux version? Yes, see the Pool Info under the Account page.
How do I use cgminer? See this English PDF tutorial for cgminer, or Spanish version, created by one of our members, for a simple walk-through.
How can I increase the speed? Important to increase speed: The default cgminer settings do not include hardware specific flags, which you may find here in the Litecoin Mining Hardware Comparison. Failing to use the proper flags can result in performance decreases in excess of 50%.
What do the intensity settings relate to? This is the same as cgminer flag --intensity. Low is 11, normal is none, high is 15, very high is 17, extreme is 19.
Can I use one account for multiple computers on same IP address? Yes, it will add your speed/rates together, you can use as many computers as you want.
Can I connect to the pool manually, through cgminer or bfgminer? Yes, see the Pool Info under the Account page.
Do you use Bitcoin and Litecoin? Yes, we are the easiest miner to use with BTC and LTC and convert on the backend automatically.
What do you use on the backend? We use cgminer, bfgminer, pooler's CPU miner, and a variety of pools.
Can I mine any cryptocurrency? Yes, regardless if you use SHA-256 or Scrypt (BTC vs LTC mode), you can earn and mine any cryptocurrency.
Can I use an ASIC? Yes, simply choose the option and run as GPU mode. Devices that work with bfgminer will work, for instance USB Block Eruptors or Butterfly Labs ASICs. You can also contact us for pool information for other ASICs.
What is the best graphics card/computer to buy? Either use a high end ATI Radeon card, or buy one of the USB Block Eruptor devices on Ebay/Amazon or a similar online store.
What drivers do I need for USB mode?
Why doesn't GPU mode work? You may need to download the OpenCL drivers; get them from here:
Where can I get the .NET framework? Try Windows Update, or use Microsoft Web Platform Installer.
Can I use a proxy server? Yes, edit intensity.txt and put the details in there, for example, add "--proxy=http://mycompany-http-proxy:8080"
Where can I download the software? Download from link here
Can I use custom flags/change intensity? Yes, you can put in whatever custom flags/parameters/arguments you want. Edit the "resources/intensity.txt" file. Put in whatever you want, like for GPU mode: "--intensity 12 --shaders 1024" or for CPU mode (number of threads): "-t 32"
submitted by KryptosBit to Bitcoin [link] [comments]

GUIDE: Coin launches and being prepared.

New CryptoCoin launch preperation guide;
I've created this short guide for new users who want to jump in on the mining of a newly launched coins. Being prepared and getting on the network immediately will lead to you finding the earliest blocks (some coins have block rewards that are higher in the beginning)
Step One - Prepare the Data/Wallet directory
The first step in this guide will be to setup the directory that will hold your wallet data, config file and blockchain store. We want to set this up first so we can immediately start solo mining without screwing around with settings that are common across all CryptoCoin wallets.
Windows 7/8; C:\Users\YOURUSERNAME\Appdata\Roaming\COIN_NAME
Windows XP; C:\Documents and Settings\YOURUSERNAME\Appdata\Roaming\COIN_NAME
Linux; ~/.coinname/
MacOS X - ~/Library/Application Support/
Create a directory in one of the above directories that will match the name of the coin (ie: Bitcoin). In this directory we are going to make the default .conf file;
Default options listed in the COINNAME.conf will be as follows;
Change the rpcport parameter to a generic port # if you plan on only having one batch file to start solo mining. WARNING, this method will interfere with mining if multiple wallets are running using the same port number. If the launch forum post lists default rpcport #s, use them instead of one generic port. (cryptocointalk/bitcointalk).
Pay attention to the original launch information forum post, adding nodes with addnode=ipaddress, can help speed up node discovery and wallet sync. You can add these options fairly quickly with a cut and paste.
If you have multiple rigs and plan to throw their hashes at the wallet if it's not on the same machine, use the .conf option* (eg: rpcallowip=192.168.0.*).
Step Two - Create your .bat file
If you've been mining for awhile, this should be a simple step, otherwise, it is beyond this tutorial on how to fine tune your mining software.
The .bat file should only be a few lines long;
cgminer --scrypt -o -u YOUR_USERNAME -p YOUR_PASSWORD the_rest_of_your_miner_config_here
This is the default for scrypt mining. Always pay attention to the announcement post for specific mining options (CPU only, keccek, scrypt-n, etc).
Change the IP address in -o option to your wallet machines ip address, should be you mining from a different machine. (making sure to set the above rpcallowip= correctly)
note: adding gen=1 to your config file will automatically start the wallets internal block generation routine, by passing the need to start your mining software. Just remember to edit this option later if you run the wallet continually and do no plan to directly mine.
Step Three - Mine!
Download and install/extract wallet, run the wallet. If everything is set correctly, you should be ahead of the game and finding blocks very quickly.
If you've found this post informative, I'm never opposed to receiving gifts of Litecoin :D LXFE81zFSTkzsV1TrRCtdy781F1aiEfYHe
also: If you have any additions to this guide, please PM or comment, so that I may correct any errors I may have included.
edit: formatting.
submitted by agentneuron to CryptoCurrency [link] [comments]

Virtual Bitcoin Miner Free Bitcoin Cloud Mining Free Bitcoin Mining Earn Money Tips nyZmRZrYvz How To Mine Bitcoin On PC, Mac, Or Linux BitCoin for Beginners - Mac OS Mining, Tips, Mining Software, Wallets And More ! Part 2 How to Mine Bitcoin on Mac with Honeyminer BITCOIN GENERATOR FREE BITCOIN MINER 2020 100% LEGIT- BITCOIN MONEY ADDER 2020 MAC OS/WINDOWS

The next step in the process of Bitcoin mining is to use the best bitcoin mining software for several operating systems. Best Bitcoin Mining Software. Following are the best bitcoin mining software you can try #1. Bitcoin Miner. It is the most popular bitcoin mining software you can choose for using on Windows 10 and Windows 8.1. This software Bitcoin mining software is going to help you a lot. Therefore, here are the best bitcoin mining software for 2020, CGMiner: CGMiner bitcoin software is compatible with almost all operating systems. This software is coded in C. This software is regarded as one of the latest bitcoin mining software. It helps to avoid stale task submission on new Mining includes the use of special equipment (e.g., GPU, ASIC, FPGA), which uses computing power and software applications for controlling mining devices. In our review, we present the most popular mining programs of 2019. You will be able to independently mine cryptocurrency on a PC running either Windows or Mac OS. Best Bitcoin Mining Software Mac OSX in 2020 . MinePeon: CGMiner is an open source ASIC/FPGA miner written in C, cross platform for Linux, Windows and OS X, and including support and binaries for RPi, Open with respect to routers and others. Poclbm . Bitcoin get unconfirmed; Bitcoin mining app mac; Bitcoin mining benefits; freeBitcoin. WeUseCoins Bitcoin mining is a lot like a giant lottery where you compete with your mining hardware with everyone on the network to earn bitcoins. Bitcoin Qt Server Solo Mining With Cgminer. October 21, , No, I will not buy a lottery ticket instead. This

[index] [12184] [6195] [30257] [29778] [22367] [2507] [24048] [14757] [6114] [29229]

Virtual Bitcoin Miner Free Bitcoin Cloud Mining Free Bitcoin Mining Earn Money Tips nyZmRZrYvz

Best Bitcoin Mining Software Best BTC Miners in 2020: Bitcoin Miner Machine The State of Bitcoin Mining Best Bitcoin Miners CGMiner EasyMiner MultiMiner BFGMiner NiceHash GUI Miner DiabloMiner ... In this episode of Crypto Miner Tips, we go over how to get started Bitcoin Mining with a PC. However, the mining software mentioned in this tutorial can be used on Mac and Linux machines as well. 💎 BITCOIN GENERATOR 🧨 FREE BITCOIN MINER 2020 🧨 100% LEGIT- BITCOIN MONEY ADDER 2020 MAC OS/WINDOWS Tags: bitcoin hack bitcoin mining bitcoin generator free bitcoin bitcoin script free ... In this video we show you how to mine bitcoin on a Mac. This process is using a just released app called Honeyminer. This makes it very easy to get started making the most money possible. USB Bitcoin Miner - The Power of 1000's Computers - Duration: 15:24. ... How to start Bitcoin mining for beginners (SUPER EASY) - ULTIMATE GUIDE - Duration: 13:51.

Flag Counter